Decal Tips and Care

Storage Tips
Store decals in an air-conditioned place.
Turn decals upside down and place a heavy, flat object on top to prevent curling.
Decal Application Tips
Clean helmets but please do not wax.
Take a moment to determine the location(s) of your custom decals. Take notice of any snaps, side mask/mounts and ear holes that your decal needs to fit around.
Orientating decals to these “landmark” areas will help with proper positioning.
Pull the decal from the backing paper and stick it down on the helmet, middle part first.
Need to reposition? Simply peel it up and reset it.
Now using your thumbs, press from the center of the decal to the outer edges.
Any wrinkles left? Pull up the edge and use your thumb to reset.
Any repositioning needs to be done at this time as the adhesive sets up quickly.
Good luck with your season openers! Your helmets will look so good, your athletes will want to play good too!

Easy Installation Tips
Make sure the surface is clean of any noticeable dirt or dust and is completely dry before applying your decal.
Before removing the backing paper of your decals, position it in the desired area (ask someone to help for larger applications), take a step back, and adjust as necessary.
Tape the wall decal in place on 4 sides and make sure it is centered and square. A tape measure can ensure accuracy!
Remove the upper left or right corner of the decal from the backing paper.
Start to apply the decal by removing the backing paper from one corner or side, working toward the opposite side. Take your time! Our wall decals do not tear or wrinkle and are easily repositionable.
Have fun applying your decal! They are easy to install, guaranteed to look great, and will help make your event a huge success!
Even more special? Our decals will never hurt your surfaces and will stay in place until you remove them!
Cleaning
When the graphic is visibly dirty, clean with a soft cloth, soap and water.
Removal
To remove the graphic, simply lift one corner and continue to pull back slowly.

Easy Installation Tips
Clean the surface with Windex or any other light cleaning solution. Make sure the area is completely dry before applying your decal.
Before removing the backing paper of your decals, position it in the desired area, take a step back, and adjust as necessary.
Tape the floor decal in place in 4 sides and make sure it is centered and square. A tape measure can ensure accuracy!
Remove part of the decal from backing paper.
Start to apply the decal by removing the backing paper from one corner or side, working toward the opposite side. Take your time! Our floor decals do not tear or wrinkle and are easily repositionable.
Have fun applying your decal! They are easy to install, guaranteed to look great, and will help make your event a huge success!
Floor decals are non-slip and designed to last up to one year with normal foot traffic.
Cleaning
When the graphic is visibly dirty, clean with a soft cloth, soap and water.
Removal
To remove the graphic, simply lift one corner and continue to pull back slowly.

Easy Installation Tips
Recommended application temperature is 25 – 86 degrees f. Be sure to clean the surface with a broom to remove all loose debris. If necessary, wash the surface with regular soap & water and be sure the area is completely dry before applying your decal.
Before removing the backing paper of your decals, position it in the desired area (ask someone to help for larger applications), take a step back, and adjust as necessary.
Tape the wall decal in place on 4 sides and make sure it is centered and square. A tape measure can ensure accuracy!
Remove the upper left or right corner of the decal from the backing paper.
Start to apply the decal by removing the backing paper from one corner or side, working toward the opposite side. Take your time! Our wall decals do not tear or wrinkle and are easily repositionable.
Cleaning
When the graphic is visibly dirty, clean with a soft cloth, soap and water.
Removal
To remove the graphic, simply lift one corner and continue to pull back slowly.

Easy Installation Tips
Recommended application temperature is 25 – 86 degrees f. Be sure to clean the surface with a broom to remove all loose debris. If necessary, wash the surface with regular soap & water and be sure the area is completely dry before applying your decal.
Before removing the backing paper of your decals, position it in the desired area (ask someone to help for larger applications), take a step back, and adjust as necessary.
Tape the floor decal in place in 4 sides and make sure it is centered and square tape measure can ensure accuracy!
Start to apply the decal to the surface by removing the backing paper from one corner or side, working toward the opposite side. Take your time! Our floor decals do not tear or wrinkle and are easily repositionable.
Once applied, you can begin using immediately.
Cleaning
When the graphic is visibly dirty, clean with a soft cloth, soap and water.
Removal
To remove the graphic, simply lift one corner and continue to pull back slowly.

Easy Installation Tips
Clean the surface with Windex and make sure the area is completely dry before applying your decal.
Determine the location of your decal before removing the backing paper.
Apply the decal by removing the backing paper from one corner or side, working toward the opposite side.